Injet HanHui 480
Injet HanHui 480
The Injet HanHui 480 is a modular commercial DC fast charging station engineered to keep charging stations online, adaptable, and consistently profitable. Built around Injet's PPC (programmable power controller) architecture, HanHui 480 minimizes failure points and accelerates maintenance, while dynamic power allocation and multi-standard connector support ensure every charging bay operates at its full potential — for charging network operators, fleet depots, and destination sites alike.
INJET HANHUI 480
Product Advantages
Faster Recovery & Lower Downtime Cost
When a fault does occur, isolating and replacing the PPC module significantly shortens repair time — turning what would otherwise be a multi-day service event into a same-day fix, without requiring a specialized EV charger technician on-site.
Fewer Failure Points by Design
Injet's PPC architecture consolidates critical dispenser components into a single pre-assembled, pre-tested module, reducing internal wiring and connections across the lifetime of the unit.
Industrial-Grade Standard Components
External components are built from industrial-grade, widely available parts, simplifying sourcing and reducing dependency on proprietary, hard-to-replace hardware.
Dynamic Power Allocation
HanHui 480 intelligently distributes available charging power across multiple connectors, helping busy sites improve utilization while maintaining stable charging performance.
High Throughput for Busy Sites
Designed for charging networks, fleet depots, and destination sites, the system supports high-volume daily operation while preserving predictable site performance.
Scalable Charging Architecture
The modular design provides a practical route from initial deployment to future high-power expansion, helping operators grow capacity when demand requires it.
Clear Charging Experience
A large interface, practical cable management, and clear status information help drivers start a charging session quickly and confidently.
Built for Commercial ROI
Higher uptime, faster maintenance, and flexible power distribution help operators protect charging revenue and improve long-term site returns.
Adaptable for Different Sites
Flexible configurations and multi-standard connector support make HanHui 480 suitable for networks, fleets, workplaces, and destination charging.
INJET HANHUI 480
Specification
Download the Injet datasheets
Access the full technical documentation for the HanYuan distributed charging system, including power cabinet and dispenser specifications, dimensions, connector options, and installation requirements.
Datasheet Download| Rated Power | 480 kW |
| Output Voltage Range | 200–1000 Vdc |
| Maximum Output Current | 500 A |
| Nominal Voltage | (CE): 400 Vac ±10% (NA): 480 Vac ±10% |
| Frequency | 50/60 Hz |
| Power Factor | >0.99 at full load |
| Operating Temperature | -30°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Operating Humidity | 5%–95%, non-condensing |
| Ingress Protection | IP54 |
| Communication | Ethernet / 4G / OCPP |
| Certification | CE / UKCA / UL |
Related Products
CONTACT US
Leave Your Info,
We'll Reach Out.
1.6